LG-Ericsson 1030i Скачать руководство пользователя

Страница: 52 / 74

1000i Series IP Phone (SMB)
User Guide

Issue 1.0

8.2 Contrast

The LCD brightness can be adjusted to enhance the display contrast.

To change the LCD Contrast:

While in an idle state, press the or - button to adjust the brightness (for UCP/eMG).



+: increase (darker), -: decrease (brighter)

8.3 Background Music

While idle, your 1000i phone can play one of the 10 music sources available. The Background Music (BGM) is

played over the speaker of your 1000i phone.

To turn on Background Music:

Press the TRANSFER/PGM button.

Dial ‘73’, the BGM code. '73' is the Code that access the Background Music selection.

Dial the two-digit music source code (00

– 10). Code ‘00’ is no BGM.

You may press the HOLD/SAVE button to play the audio or dial a different two-digit code (00

– 10)

to select a different source.

8.4 Using Internal, External and Meet-Me Paging

You can broadcast announcements to other stations and/or external speakers. Stations are assigned to

receive announcements from one or more of the Internal Page Zones. In addition, the system can send

announcements to one or both of the External Page Zones that can be connected to external speakers. Your

iPECS System permits access to the following types of Page Zones.

Note the number of Internal and External Zones varies between the iPECS systems based on the platform

and size of the iPECS system. Contact your system administrator for details.



Internal Page Zones



Internal All Call Page



External Page Zones



External All Call Page



All Call Page

If the desired Page Zone is busy, you can elect to be recalled when the zone returns to idle. When the zone

returns to idle, you will receive a callback.

In your Page announcement, you can request a party answer the Page using Meet-Me Paging. In this case,

the paged party may answer the page from any phone in the system by dialing the Meet-Me code. After dialing

the Meet-Me code, the party is connected to your phone and the Page Zone returns to idle.

To make a page:

Lift the handset.

Dial the desired Page Zone, contact your system administrator for details.

If assigned, after the page warning tone, make your announcement.

Содержание 1030i











































































Результаты поиска

Содержание 1030i

Отзывы:

Похожие инструкции для 1030i

Бренды по названию

Популярные бренды

LG-Ericsson 1030i, Руководство пользователя

Результаты поиска

Содержание 1030i

Отзывы:

Похожие инструкции для 1030i

Бренды по названию

Популярные бренды