1
2
3
4
5
1
Right side 100 mm (3.9 in.)
2
Front
482.6 mm (19.5 in.)
3
Left side
100 mm (3.9 in.)
4
Rear
100 mm (3.9 in.)
5
Top
393.7 mm (15.5 in.)
Printer configurations
CAUTION—TIPPING HAZARD:
Floor
‑
mounted configurations require additional furniture for stability. You must
use either a printer stand or printer base if you are using a high
‑
capacity input tray, a duplex unit and an input
option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and
faxes, you may need additional furniture. For more information, see
www.lexmark.com/multifunctionprinters
.
You can configure your basic printer by adding up to four 550
‑
sheet optional drawers and a 2000
‑
sheet high
‑
capacity
feeder. A caster base and a spacer are supported in any configurations.
Spacers are nonfunctional trays that can be used to add height to a printer stack. Spacers must be:
•
Placed directly on a caster base or table top.
•
Placed at the bottom of all tray stacks, and cannot be used with an optional 2000
‑
sheet high
‑
capacity drawer.
For information on installing the spacers, see the instruction sheet that came with the hardware.
Learning about the printer
11
