Lexmark X746, Руководство пользователя

Страница: 314 / 350

R
EPLACE THE PHOTOCONDUCTOR
Replace the photoconductor of the color with the repeating defect, if the defects occur in the following instances:
• Every 28.3 mm (1.11 in.) of the page
•
Every 72.4 mm (2.85 in.) of the page
R
EPLACE THE FUSER
Replace the fuser if print defects occur in the following instances:
• Every 47.4 mm (1.87 in.) of the page
• Every 94.8 mm (3.73 in.) of the page
•
Every 113 mm (4.45 in.) of the page
Shadow images appear on prints
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
C
HECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray:
1
From the Paper menu on the printer control panel, check the Paper Type and Paper Weight settings.
2
Before sending the job to print, specify the correct paper type setting:
•
For Windows users, specify the paper type from Print Properties.
•
For Macintosh users, specify the paper type from the Print dialog.
M
AKE SURE THE PHOTOCONDUCTOR IS NOT DEFECTIVE
Replace the defective photoconductor.
M
AKE SURE THE PRINT OR TONER CARTRIDGE IS NOT LOW ON TONER
1
Remove the cartridge.
Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print
quality of future print jobs.
2
Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.
3
Reinsert the cartridge.
Note: If print quality does not improve, then replace the cartridge.
Troubleshooting 314