Lexmark X548 Series, Руководство по обслуживанию

Страница: 139 / 347

Diagnostic aids
3-23
7525-63 x
Go Back
Previous
Next
7. Touch
Submit
to save the settings, or touch
Back
to return to
PRINTER SETUP
without saving any
changes.
Note:
If either Configuration ID is invalid,
Invalid ID
appears. The printer discards the changes and the
display returns to
PRINTER SETUP
. If both Configuration IDs are valid,
Submitting changes
appears and the display returns to
PRINTER SETUP
.
ITU Barcode
The 16-digit numeric value matches the ITU installed in the printer. If you replace the ITU, re-enter this value.
To enter the ITU barcode:
1.
Navigate to
PRINTER SETUP > ITU Barcode.
2.
Enter the 16-digit value.
3.
Touch
Submit
to save the settings, or touch
Back
to return to
PRINTER SETUP
without saving any
changes.
Note:
CHECK SUM DOES NOT MATCH
appears if the value entered is incorrect. Check and re-enter the value.
Reset Maintenance Counter
To reset the Maintenance Counter:
1. Navigate to
PRINTER SETUP
>
Reset Maintenance Counter
>
Reset Maintenance Counter
.
2.
Resetting Maintenance Counter
appears.
Reset Fuser Cnt
Resets the fuser count value to zero. The Event Log records each time that a user executes the Reset Fuser
Count operation. See
“Event Log” on page 3-34
for more information. This setting appears only if the
Maintenance Warning and Intervention function is enabled in the printer Configuration ID.
Note:
Once Reset Fuser Count is initiated, the sequence cannot be canceled. The printer ignores all key inputs.
To reset the Fuser cnt:
1.
Navigate to
PRINTER SETUP > Reset Fuser Cnt > Reset Fuser Cnt
.
2.
Resetting Fuser Cnt Value
appears.
EP Setup
EP Defaults
Warning:
Do not change the settings of this menu without guidance from your next level of support.
This setting is used to restore each printer setting listed in EP SETUP to its factory default value.
To restore EP Defaults:
1.
Navigate to
EP SETUP > EP Defaults
.
2.
Touch
Restore
to reset the values to the factory settings, or touch
Do Not Restore
to exit without
resetting.
3. The display returns to
EP SETUP
.