Lexmark MS331 Скачать руководство пользователя страница 100

Страница: 100 / 154

Action

Yes

Step 1

Check if the paper loaded is supported.

Note:

If paper is not supported, then load a supported paper.

Print the document.

Is the paper curled?

Go to step 2.

The problem is
solved.

Step 2

Check if the printer is using a genuine and supported Lexmark
toner cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Is the paper curled?

Go to step 3.

The problem is
solved.

Step 3

Adjust the guides in the tray to the correct position for the paper
loaded.

Print the document.

Is the paper curled?

Go to step 4.

The problem is
solved.

Step 4

Depending on your operating system, specify the paper size
and paper type from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the settings match the paper loaded.

•

You can also change the setting on the printer control
panel. Navigate to

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Is the paper curled?

Go to step 5.

The problem is
solved.

Step 5

Remove paper, ﬂip it over, and then reload paper.

Print the document.

Is the paper curled?

Go to step 6.

The problem is
solved.

Step 6

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Is the paper curled?

Contact

customer

support

The problem is
solved.

Troubleshoot a problem

100

Содержание MS331



























































































































































Результаты поиска

Содержание MS331

Отзывы:

Похожие инструкции для MS331

Бренды по названию

Популярные бренды

Lexmark MS331, Руководство пользователя

Результаты поиска

Содержание MS331

Отзывы:

Похожие инструкции для MS331

Бренды по названию

Популярные бренды