The staple, hole punch finisher must not be combined with any other output options.
•
In a configuration with three optional finishers, the output expander and mailbox may be installed in any order.
•
In a configuration with two optional finishers:
–
The staple finisher must always be on top.
–
The high
‑
capacity output expander must always be at the bottom.
–
The output expander is the only option that can be placed on top of the high
‑
capacity output expander.
•
When using optional trays:
–
Always use a caster base when the printer is configured with a 2100
‑
sheet tray.
–
The 2100
‑
sheet tray must always be at the bottom of a configuration.
–
A maximum of four optional trays may be configured with the printer.
–
The optional 250
‑
and 550
‑
sheet trays may be installed in any order.
Using the printer control panel
1
2
3
4
5
6
7
Use the
To
1
Display
•
View the printer status.
•
Set up and operate the printer.
2
Home button
Go to the home screen.
3
Sleep button
Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep Mode:
•
Press any hard button.
•
Pull out Tray 1 or load paper in the multipurpose feeder.
•
Open a door or cover.
•
Send a print job from the computer.
•
Perform a power
‑
on reset with the main power switch.
•
Attach a device to the USB port on the printer.
4
Keypad
Enter numbers, letters, or symbols.
5
Stop or Cancel button Stop all printer activity.
6
Indicator light
Check the status of the printer.
Using M5155 and M5163
42
