Lexmark C2132, Руководство пользователя

Страница: 126 / 226

Configuring printer hard disk encryption
Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.
Note: Some printer models may not have a printer hard disk installed.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Security > Disk Encryption .
Note: Disk Encryption appears in the Security Menu only when a formatted, non
‑
defective printer hard
disk is installed.
3
From the Disk encryption menu, select Enable .
Notes:
•
Enabling disk encryption will erase the contents of the printer hard disk.
•
Disk encryption can take from several minutes to more than an hour, during which the printer will be
unavailable for other user tasks.
4
Click Submit .
Using the printer control panel
1
Turn off the printer.
2
Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress
bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is
fully turned on, a list of functions appears on the printer display.
3
Touch Disk Encryption > Enable .
Note: Enabling disk encryption will erase the contents of the printer hard disk.
4
Touch Yes to proceed with disk wiping.
Notes:
•
Do not turn off the printer during the encryption process. Doing so may result in loss of data.
•
Disk encryption can take from several minutes to more than an hour, during which the printer will be
unavailable for other user tasks.
•
A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the
printer will return to the Enable/Disable screen.
5
Touch Back > Exit Config Menu .
The printer will perform a power
‑
on reset, and then return to normal operating mode.
Securing the printer 126