LevelOne WHG-505, Руководство пользователя

Страница: 46 / 314

40
example, the VLAN Tag setting is required for Tag-Based mode.
Select Service Zone Mode: Select a VLAN mode, either Port-Based or Tag-Based.
The switches deployed under WHG-505 in Port-Based mode must be Layer2 Switches only. The switch
deployed under WHG-505 in Tag-Based mode must be a VLAN switch only.
Port-Based: When Port-Based mode is selected; traffic from different virtual Service Zones will be
distinguished by physical LAN ports. Each LAN port can be mapped to one Service Zone in the form of a
many-to-one mapping between ports and Service Zones.
o
Specify a desired Service Zone for each LAN Port: For each LAN port, select a Service Zone to
which the LAN port is to be mapped from the drop-down list box.
By factory default, all LAN ports are mapped to Default Service Zone; therefore, the administrator can
enter the web management interface via any LAN port upon the first power up of the system. From the
drop-down list box, all disabled Service Zones are gray-out; to activate any desired Service Zone,
please configure the desired Service Zone under the Service Zone tab and enable its Service Zone
Status.
Tag-Based: When the Tag-Based mode is selected, traffic from different virtual Service Zones will be