LevelOne WHG-505 Скачать руководство пользователя

Страница: 163 / 314

157

10.6 Dynamic Domain Name Service

Configure Dynamic Domain Name Service, go to: Network >> DDNS.

Before activating this function, you must have your Dynamic DNS hostname registered with a Dynamic DNS

provider. WHG-505 supports DNS function to alias the dynamic IP address for the WAN port to a static domain name,

allowing the administrator to easily access WHG-505’s WAN. If the dynamic DHCP is activated at the WAN port, it

will update the IP address of the DNS server periodically. These settings will become effective immediately after

clicking Apply.

DDNS: Enable or disable this function.

Provider: Select the DNS provider.

Host name: The IP address/domain name of the WAN port.

Username/E-mail: The register ID (username or e-mail) for the DNS provider.

Password/Key: The register password for the DNS provider.

Note:

To apply for free Dynamic DNS service, you may go to

http://www.dyndns.com/services/dns/dyndns/howto.html

Содержание WHG-505



























































































































































































































































































































Результаты поиска

Содержание WHG-505

Отзывы:

Похожие инструкции для WHG-505

Бренды по названию

Популярные бренды

LevelOne WHG-505, Руководство пользователя

Результаты поиска

Содержание WHG-505

Отзывы:

Похожие инструкции для WHG-505

Бренды по названию

Популярные бренды