LEVANTE s.r.l.
Via dell’Economia 10 – 46035 Ostiglia MN Italia
VAT NO. and TAX CODE 01730440201
Reg. of Comp. of MN no. 01730440201 Share Cap. fully paid-up €20,800.00 Economic and Administrative Index
No. 178082
Tel. +39 0386 801814 Fax. +39 0386 801955
e-mail: [email protected]
NEWBINGO 2017-operating and mainspare parts v.02072017
18
With load lifted at 1500 mm, the slope of the surface on which the machine can be used must be less than 1%.
When anchoring the load, observe the safety criteria dictated by common sense and by the current regulations
4.11
SUCTION CUPS
This accessory makes it possible to
typically picking and handling glass or
smooth panels made of such materials
as to ensure appropriate efficiency.
Materials, to be suitable for handling
with suction cup, must have a sufficient
degree of smoothness and must not
exceed the sizes and weights shown on
the data plate.
Before every use, always make sure that the rubber is not dirty, especially due to lubricants or slippery
substances.
The rubber must be cleaned using neutral, non-corrosive water-based substances and not with solvents.
Leaving the rubber exposed to atmospheric agents such as UV rays or intense heat sources may deteriorate its quality
and must, therefore, be avoided.
Leaving the rubber in excessively high or low temperatures may reduce gripping safety. Observe the operating and
storage instructions provided by the manufacturer.
If the rubber shows signs of cracks, request a replacement of the rubber with an original spare part.
