LEVANTE s.r.l.
Via dell’Economia 10 – 46035 Ostiglia MN Italia
VAT NO. and TAX CODE 01730440201
Reg. of Comp. of MN no. 01730440201 Share Cap. fully paid-up €20,800.00 Economic and Administrative Index
No. 178082
Tel. +39 0386 801814 Fax. +39 0386 801955
e-mail: [email protected]
NEWBINGO 2017-operating and mainspare parts v.02072017
16
4.6
REEL-CARRIER
The accessory consists of a steel cradle with a
"V-shaped" profile suitable for transporting
reels.
Maximum capacity and limits of use are stated on the
data plate.
4.7
ROLLER UNIT
The accessory consists of a load surface
with six non-frictioned and non-braked
rollers which facilitate the sliding of the
load.
The roller is fitted with a protection
surface that prevents hands and fingers
from being put between adjacent rollers,
preventing body parts from being crushed
between the load and the rollers during handling. It also integrates load
containment edges which prevent the load from escaping sideways during handling
and prevent the loading of objects with dimensions exceeding the load surface itself
and, therefore, being dangerous.
There is a two-position manual protection stop (1) on the front part which must
be placed in a blocked status
.
Once the reel is loaded, make sure that the stop is in a safety position before making any
movement.
It is strictly forbidden to remove or alter the safety stop or protection.
Periodically lubricate the safety stop. Do not use the equipment if the stop is not working properly.
4.8
ROTO-REELS
The roto-reels are used to lift and rotate the reels
from a horizontal to a vertical position and vice
versa.
The reel is gripped by interference which is
obtained between the reel core and the
expansion rubber placed on the coil, inserted in
the core of the reel itself.
There are two versions, respectively for inner
diameters of the core between 66 mm and 72
mm or for reels with diameter between 79 mm and 82 mm.
1
