LEVANTE s.r.l.
Via dell’Economia 10 – 46035 Ostiglia MN Italia
VAT NO. and TAX CODE 01730440201
Reg. of Comp. of MN no. 01730440201 Share Cap. fully paid-up €20,800.00 Economic and Administrative Index
No. 178082
Tel. +39 0386 801814 Fax. +39 0386 801955
e-mail: [email protected]
NEWBINGO 2017-operating and mainspare parts v.02072017
4
1.
Main information and safety regulations
The manual is structured to be easily read and understood, using the symbols in the table, to support the operator
and maintenance technician.
HAZARD / ATTENTION
INDICATION
CAUTION / WARNING
The instruction manual is a document issued by
LEVANTE S.r.l.
and an integral part of the machine. It is
unambiguously identified to allow traceability and any subsequent references.
This document must be kept and used through its operational life, even in the case of sale to third parties.
1.1
Purpose of the document
The main purpose of the instructions manual is to provide customers and personnel interacting with the machine the
information necessary for its proper use and maintenance in optimal conditions, with particular regard for this to
happen in maximum safety conditions. It is recommended to scrupulously observe the safety precautions throughout
operation, service, repair and dismantling of the machine.
Make sure that this operating and maintenance manual is read and understood by all personnel in charge of
machine operation or intervention on the machine.
1.2
Responsibilities and duties
The machine was built using resistant and durable materials, in full compliance with the construction standards
applicable in the European Union.
LEVANTE S.r.l.
is the machine importer on the market by the European Union and, as such, undertakes the burden to
certify conformity with the legal provisions in force.
LEVANTE S.r.l.
will not take any responsibility for non-compliance with the operating instructions provided in this
manual and for use outside the machine use limits.
Pursuant to Italian Legislative Decree 81/2008, it is mandatory for the employer to ensure the safety of workers by
appropriately training them on the correct use of the work equipment and informing them of the risks associated with
misuse. Operators must be informed and trained by the employer of the proper use and maintenance of the forklift.
Operators and maintenance technicians must comply with the general accident-prevention standards prescribed by
EU Directives and legislation in the country of destination (Legislative Decree 81/2008 in Italy).
1.3
Maintenance/technical assistance of the machine
If you need any assistance, please contact
LEVANTE S.r.l.
If the user fails to comply with this publication, we are not liable for problems or anomalies on the proper operation of
the supply and on the validity of the warranty stipulated in the contractual phase.
1.4
Machine identification data
When the machine is first marketed,
LEVANTE S.r.l.
shall be identified as the importer of the machine in compliance
with current legislation by means of the documents listed below:
Declaration of conformity according to Annex II-Directive 2006/42/EC
Marking plate
Instructions manual
