Lenovo ThinkSystem SR150, Руководство по установке

Страница: 51 / 90

Install the PCIe riser assembly
Use this information to install the PCIe riser assembly.
Before you install the PCIe riser assembly, complete the following steps:
1. Read “Safety” on page iii and “Installation Guidelines” on page 32 to ensure that you work safely.
2. Install adapters (see “Install an adapter” on page 40 ).
To install the PCIe riser assembly, complete the following steps:
Step 1. Align the two screw slots on the PCIe riser card with the riser cage. Make sure two screw slot are
aligned at the same time; then, fasten the screws to secure the riser card to the riser cage.
Figure 32. PCIe riser assembly installation
Step 2. Attach the label to the front side of the PCIe riser assembly.
Figure 33. PCIe riser assembly installation
Step 3. Align the two tabs on PCIe riser assembly with the slots on the rear chassis; then, insert the PCIe
riser assembly into the connector on the system board. Carefully press the riser card straight down
into the slot until it is fully seated.
Chapter 3
.
Server hardware setup
43