Lenovo ThinkSystem SR150, Руководство по установке

Страница: 60 / 90

Figure 43. Installing the processor
Step 2. Close the processor retainer, and push the handle to the locked position.
Figure 44. Closing the processor retainer
After you install the processor, complete the following steps:
1. Reinstall the heat sink (see “Install the heat sink” on page 52 ).
2. Install the top cover onto the server (see “Install the top cover” on page 54 ).
3. Install the server into the rack if necessary.
4. Reconnect power cords and all external cables.
Install the heat sink
Use this information to install the heat sink. This procedure must be executed by a trained technician.
Before you install the heat sink, complete the following steps:
1. Read “Safety” on page iii and “Installation Guidelines” on page 32 to ensure that you work safely.
To install the heat sink, complete the following steps:
Step 1. Align the four screws on the heat sink with the corresponding screw holes on the system board.
52
ThinkSystem SR150 Setup Guide