Lenovo ThinkSystem NE2552E, Инструкция по применению

Страница: 380 / 574

380
NE2552E Application Guide for ENOS 8.4
Steps 2 and 3 are optional, depending on the criteria that you want to match. In
Step 2, the network filter number is used to match the subnets defined in the
network filter. In Step 3, the autonomous system number is used to match the
subnets. Or, you can use both (Step 2 and Step 3) criteria: access list (network filter)
and access path (AS filter) to configure the route maps.
3.
(Optional) Configure the attributes in the AS filter menu.
4.
Set up the BGP attributes.
If you want to overwrite the attributes that the peer router is sending, then define
the following BGP attributes:
 Specify up to 32 AS numbers that you want to prepend to a matched route and
the local preference for the matched route.
 Specify the metric [Multi Exit Discriminator (MED)] for the matched route.
5.
Enable the route map.
6.
Turn BGP on.
7.
Assign the route map to a peer router.
Select the peer router and then add the route map to the incoming route map list,
or to the outgoing route map list.
8.
Exit Router BGP mode.
NE2552E(config-route-map)# as-path-list 1 as 1
NE2552E(config-route-map)# as-path-list 1 action deny
NE2552E(config-route-map)# as-path-list 1 enable
NE2552E(config-route-map)# as-path-preference
<AS number>
[
<AS number>
] ...
NE2552E(config-route-map)# local-preference
<local preference value>
NE2552E(config-route-map)# metric
<metric value>
NE2552E(config-route-map)# enable
NE2552E(config-route-map)# exit
NE2552E(config)# router bgp
NE2552E(config-router-bgp)# enable
NE2552E(config-router-bgp)# neighbor 1 route-map in
<1 ‐ 32>
NE2552E(config-router-bgp)# neighbor 1 route-map out
<1 ‐ 32>
NE2552E(config-router-bgp)# exit