Lenovo ThinkStation P910 Скачать руководство пользователя страница 92

Страница: 92 / 244

3. Right-click your C drive and then click

Properties

4. Check the amount of free space, and then click

Disk Cleanup

5. A list of unnecessary file categories is displayed. Select each file category you want to delete,

and then click

• Turn some Windows features off or remove some unnecessary programs.

1. Click the Start button to open the Start menu.

2. Depending on your Windows version, do one of the following:

– For Windows 7: Click

Control Panel

– For Windows 10: Click

Windows System

➙

Control Panel

3. View Control Panel by Large icons or Small icons, and then click

Programs and Features

4. Do one of the following:

– To turn some Windows features off, click

Turn Windows features on or off

. Follow the

instructions on the screen.

– To remove some unnecessary programs, select the program you want to remove, and then click

Uninstall/Change

Uninstall

The free memory space is insufficient.

Solutions:

• Right-click a blank area on the taskbar and open Task Manager. Then, end some tasks you are not

performing.

• Install additional memory modules. Refer to Chapter 9 “Installing or replacing hardware” on page 101. To

purchase memory modules, go to:
http://www.lenovo.com

Serial connector problem

The serial connector cannot be accessed.

Solutions:

• Connect the serial cable from the serial connector on the computer to the serial device. If the serial device

has its own power cord, connect the power cord to a grounded electrical outlet.

• Turn on the serial device and keep the device online.

• Install any application programs supplied with the serial device. Refer to the documentation that comes

with the serial device for more information.

• If you added one serial-connector adapter, ensure that the adapter is installed correctly.

USB device problem

A USB device cannot be accessed.

Solutions:

• Connect the USB cable from the USB connector to the USB device. If the USB device has its own power

cord, connect the power cord to a grounded electrical outlet.

• Turn on the USB device and keep the device online.

• Install any device drivers or application programs supplied with the USB device. Refer to the

documentation that comes with the USB device for more information.

P910 Hardware Maintenance Manual

Содержание ThinkStation P910





















































































































































































































































Результаты поиска

Содержание ThinkStation P910

Отзывы:

Похожие инструкции для ThinkStation P910

Бренды по названию

Популярные бренды

Lenovo ThinkStation P910, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkStation P910

Отзывы:

Похожие инструкции для ThinkStation P910

Бренды по названию

Популярные бренды