Lenovo ThinkStation P910 Скачать руководство пользователя страница 91

Страница: 91 / 244

No sound comes from the Bluetooth headset or headphones.

Solution:

Set the Bluetooth headset or headphones as the default device.

1. Exit the application that uses the sound device (for example, Windows Media Player).

2. Right-click the volume icon in the Windows notification area on the taskbar.

Note:

If the volume icon is not displayed in the Windows notification area, add the icon to the

notification area. Refer to Window help system.

3. Click

Playback devices

4. If you are using the Headset profile, select

Bluetooth Hands-free Audio

, and then click

Set Default

. If

you are using the AV profile, select

Stereo Audio

, and then click

Set Default

5. Click

Performance problems

Excessive fragmented files exist on the storage drives.

Solution:

Use the Windows disk defragmentation or disk optimization feature to clean up the files.

Note:

Depending on the volume of the storage drives and amount of data stored on the storage drives, the

disk-defragmentation process might take up to several hours.

1. Close any open programs and windows.

2. Click the Start button to open the Start menu.

3. Depending on your Windows version, do one of the following:

• For Windows 7: Click

Computer

• For Windows 10: Click

Windows System

➙

File Explorer

➙

This PC

4. Right-click your C drive and then click

Properties

5. Click the

Tools

tab.

6. Depending on your Windows version, do one of the following:

• For Windows 7: Click

Defragment now

. Select the desired drive and then click

Defragment disk

• For Windows 10: Click

Optimize

. Select the desired drive and then click

Optimize

7. Follow the instructions on the screen.

The free storage drive space is insufficient.

Solutions:

Free up the storage drive space.

• Clean out your Inbox, Sent Items, and Deleted Items folders from your e-mail application.

• Clean up your C drive.

1. Click the Start button to open the Start menu.

2. Depending on your Windows version, do one of the following:

– For Windows 7: Click

Computer

– For Windows 10: Click

Windows System

➙

File Explorer

➙

This PC

Chapter 7

Troubleshooting, diagnostics, and recovery

Содержание ThinkStation P910





















































































































































































































































Результаты поиска

Содержание ThinkStation P910

Отзывы:

Похожие инструкции для ThinkStation P910

Бренды по названию

Популярные бренды

Lenovo ThinkStation P910, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkStation P910

Отзывы:

Похожие инструкции для ThinkStation P910

Бренды по названию

Популярные бренды