Lenovo ThinkServer TS200v, Руководство по техническому обслуживанию аппаратной части

Страница: 26 / 108

Message/Symptom FRU/Action
Computer will not perform a Wake On
LAN
®
(if applicable)
1. Check power supply and signal cable
connections to network adapter.
2. Ensure that the operating system settings
are set to enable Wake on LAN.
3.
Ensure Wake On LAN feature is enabled
in Setup/Configuration (see “Starting the
Setup Utility program” on page 79)
4. Ensure network administrator is using
correct MAC address.
5. Ensure no interrupt or I/O address
conflicts.
6. Network adapter (advise network
administrator of new MAC address)
Dead computer. See “Power Supply
Problems” on page 16.
1. Power Supply
2. System Board
Diskette drive in-use light remains on or
does not light when drive is active.
1.
Diskette Drive
2.
System Board
3.
Diskette Drive Cable
Blank screen except for flashing cursor.
1. System Board
2. Primary Hard Disk Drive
3. Hard Disk Drive Cable
Incorrect memory size during POST
1. Run the Memory tests.
2. Memory Module
3. System Board
″
Insert a Diskette
″
icon appears with a
known-good diagnostics diskette in the first
3.5-inch diskette drive.
1.
System Board
2.
Diskette Drive Cable
3.
Network Adapter
Intensity or color varies from left to right of
characters and color bars
1. Display
2. Video adapter (if present)
3. System Board
No power or fan not running
1. See “Power Supply Problems” on page
16.
Non-system disk or disk error-type message
with a known-good diagnostic diskette.
1. Diskette Drive
2. System Board
3. Diskette Drive Cable
Other display symptoms not listed above
(including blank or illegible display)
1.
Display
2.
System Board
Power-on indicator or hard disk drive in-use
light not on, but computer works correctly
1. Power switch/LED assembly
2. System Board
Printer problems
1. Printer
2. System Board
20
ThinkServer TS200v Types 0981, 0992, 1008, and 1010: Hardware Maintenance Manual