Lenovo ThinkServer TS130 1098, Руководство по техническому обслуживанию аппаратной части

Страница: 44 / 130

1. Save any open documents and exit all applications.
2. Insert the ThinkServer EasyStartup DVD that came with your server into the DVD drive.
Note: You do not need to use the driver disc that came with the Ethernet card.
3. Right-click My Computer and select Properties . The System Properties window opens.
4. On the Hardware tab, click the Device Manager button. The Device Manager window opens.
5. Expand Network adapters and then right-click one of the Ethernet cards (PRO/1000PT or the yellow
question mark).
6. Select Update Driver... . The Hardware Update Wizard program opens.
7. Select Install the software automatically (Recommended) and click Next to continue.
8. Follow the instructions on the screen.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 58.
Installing or removing a memory module
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 23.
This section provides instructions on how to install or remove a memory module.
Your server has four slots for installing or replacing DDR3 UDIMMs that provide up to a maximum of 32 GB
system memory. When installing or replacing a memory module, use the following guidelines:
• Use 2 GB, 4 GB, or 8 GB DDR3 UDIMMs in any combination up to a maximum of 32 GB.
• Install memory modules in the sequence of DIMM 2, DIMM 4, DIMM 1, and DIMM 3. See “Locating
parts on the system board” on page 17.
• If you are installing two or more memory modules, ensure that you install higher capacity memory
modules first.
To install or replace a memory module, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See “Removing the server cover” on page 25.
3. Lay the server on its side for easier access to the system board.
4. Locate the memory slots. See “Locating parts on the system board” on page 17.
5. Remove any parts that might prevent your access to the memory slots. Depending on your server
model, you might need to remove the PCI Express x16 card for easier access to the memory slots. See
“Installing or replacing a PCI card” on page 28.
6. Depending on whether you are installing or replacing a memory module, do one of the following:
32
ThinkServer TS130 Hardware Maintenance Manual