Lenovo ThinkServer TS130 1098 Скачать руководство пользователя страница 96 | Manualshive

Страница: 96 / 130

background image

•

Compatibility notes

This menu provides information about the operating systems and server configurations supported by the
version of the program you are using.

•

User Guide

This menu provides information about the features of the program and instructions on how to use the
program.

•

Hardware list

This menu displays a list of hardware devices detected by the program.

•

Install operating system

This menu displays a series of choices and prompts to collect information required for operating system
installation, prepares the hard disk drive for installation, and then initiates the installation process using
your operating system installation disc.

•

Download drivers

This menu helps you download the required device drivers from the

ThinkServer EasyStartup

DVD to a

removable storage device so that you can easily get the drivers for server configuration when you need
them.

Note:

The most up-to-date device drivers for various server models are always available for download on

the Lenovo Support Web site at:
http://www.lenovo.com/drivers

•

About

This menu provides the version information and legal notices.

Using the ThinkServer EasyStartup program on a Windows operating
system

You can run the

ThinkServer EasyStartup

DVD on a Windows operating system with the Internet Explorer

®

6.0

Web browser or a later version installed. Enter the operating system and insert the

ThinkServer EasyStartup

DVD into an internal or external optical drive. The DVD starts automatically in most environments. If the DVD
does not start automatically, open the launch.exe file located in the root directory of the DVD.

Notes:

• You should read and accept the Lenovo License Agreement when prompted.

• On the Microsoft Windows Server 2003 operating system, you might need to add the Uniform Resource

Locator (URL) for the ThinkServer EasyStartup program Web page to the trusted Web site list so that
the page can open correctly.

You can do the following when using the ThinkServer EasyStartup program on a Windows operating system.

• View a general introduction to your ThinkServer server model and the specific server configuration

information.

• View general guidance on how to use the

ThinkServer EasyStartup

DVD.

• Download the required device drivers to a removable storage device so that you can easily get the

drivers for server configuration when you need them, especially when you finish installing an operating
system without using the

ThinkServer EasyStartup

DVD and need appropriate device drivers to configure

your server.

• Install the required device drivers directly on the server on which you are running the

ThinkServer

EasyStartup

DVD.

84

ThinkServer TS130 Hardware Maintenance Manual

«
...
94
95
96
97
98
...
»

Содержание ThinkServer TS130 1098



































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkServer TS130 1098

Бренд: Razberi Страницы: 113

Бренд: Korenix Страницы: 2

Бренд: SEH Страницы: 20

Бренд: Edimax Страницы: 93

Бренд: Novell Страницы: 152

Бренд: Thecus Страницы: 130

SUPERSERVER 5014C-MT

Бренд: Supero Страницы: 112

1870N - HL B/W Laser Printer

Бренд: Brother Страницы: 204

Бренд: Kramer Страницы: 2

SDSTX3110-121S-LRT

Бренд: Transition Networks Страницы: 109

Бренд: Black Box Страницы: 48

Бренд: Axis Страницы: 316

Express5800/140Hf

Бренд: NEC Страницы: 482

Бренд: Gigabyte Страницы: 141

Бренд: Gigabyte Страницы: 138

TalkAnytime TA2410

Бренд: Multitech Страницы: 235

Бренд: NuPrime Страницы: 26

A+ SERVER 1022G-URF

Бренд: Supero Страницы: 95

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды