Lenovo ThinkServer TD350 70DG, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 39 / 220

6 7 8 Ethernet RJ-45 connectors
Used to attach an Ethernet cable for a LAN. Each Ethernet connector has two status LEDs to help you
identify the Ethernet connectivity, activity, and connection speed.
The Ethernet connector 0 (callout 6 ) marked with “MGMT” is for system management by default. If you
want to use remote management functions, connect an Ethernet cable to the Ethernet connector 0. You
also can set the Ethernet connector 1 for system management. See “Setting an Ethernet connector
for system management” on page 60.
Figure 6. Ethernet status LEDs
Ethernet status LED Color Status Description
Amber On The connection speed is 1000 Mbps.
Green On
The connection speed is 100 Mbps.
1
Left: data speed
None Off The connection speed is 10 Mbps.
Green On The server is connected to a LAN.
None Off The server is disconnected from a LAN.
2
Right: link and activity
Green
Blinking The LAN is connected and active.
9 Server cover key
Used to open or lock the server cover. Save the key in a safe place to avoid loss.
10 Serial connector
Used to attach a device that uses a 9-pin serial connector.
Server cover lock
The server cover lock 1 prevents unauthorized access to the inside of your server. You can remove the key
attached on the rear of the server and use it to open or lock the server cover.
Note: Depending on the model, your server might look slightly different from the illustration in this topic.
Chapter 3
.
Product overview
25