Lenovo ThinkServer TD350 70DG страница 150 Скачать руководство пользователя

Страница: 150 / 220

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Notes:

• Ensure that you install the correct type of microprocessor option your server supports. When two

microprocessors are installed, both must have the same core voltage and core speed.

• Use any documentation that comes with the microprocessor option kit and follow those instructions in

addition to the instructions in this topic.

• Your microprocessor, socket, and socket cover might look slightly different from the illustrations in this

topic.

To install the second microprocessor, do the following:

1. Remove all external media from the drives and turn off all attached devices and the server. Then,

disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.

2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,

clean, and static-protective surface. See the

Rack Installation Instructions

that comes with the server. If

the server is in tower form factor, lay the server on its side for easier operation.

3. Remove the server cover. See “Removing the server cover” on page 70.

4. Remove the cooling shroud. See “Removing the cooling shroud” on page 73.

5. Locate the microprocessor socket 2 on the system board. See “System board components” on page 44.

6. Open the small handle

first by gently pressing down the handle a little bit and then pushing the handle

inward to release it from the secured position. Then, open the other small handle

in the same way.

Note:

There are two marks on the microprocessor retainer. Open the small handle marked with

first and then open the other small handle marked with . Always follow the correct sequence when
you open the small handles.

Figure 94. Opening the handles

136

ThinkServer TD350 User Guide and Hardware Maintenance Manual

Содержание ThinkServer TD350 70DG




























































































































































































































Результаты поиска

Содержание ThinkServer TD350 70DG

Отзывы:

Похожие инструкции для ThinkServer TD350 70DG

Бренды по названию

Популярные бренды

Lenovo ThinkServer TD350 70DG, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание ThinkServer TD350 70DG

Отзывы:

Похожие инструкции для ThinkServer TD350 70DG

Бренды по названию

Популярные бренды