Lenovo ThinkServer RD440, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 185 / 248

Before you begin, review the following hard disk drive installation rules:
• Follow the order of the hard-disk-drive bays when installing a hard disk drive. See “Front view of the
server” on page 16 to locate the hard-disk-drive bays in your server.
• For RAID configuration, the hard disk drives must be the same type with the same capacity if they are
within a single RAID array. For more information, see “Configuring RAID” on page 76.
• For hard disk drives with different capacities, install the hard disk drives following the order of the
hard-disk-drive bays as well as the order from the lowest capacity to the highest capacity.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• Depending on the model, your server might look slightly different from the illustrations in this topic.
• Use any documentation that comes with the hot-swap hard disk drive and follow those instructions in
addition to the instructions in this topic.
To install or replace a hot-swap hard disk drive, do the following:
1. Do one of the following:
• If you are installing a new hot-swap hard disk drive, refer to the hard disk drive installation rules in
this topic and locate the appropriate hard-disk-drive bay. Then, press the circled area
2
to open
the handle of the dummy hard-disk-drive tray.
• If you are replacing a failing hot-swap hard disk drive, locate the failing hard disk drive and press
the release button 1 to open the handle of the hard disk drive.
Figure 132. Opening the handle of a 3.5-inch hot-swap hard disk drive or dummy tray
Chapter 6
.
Installing, removing, or replacing hardware
173