Lenovo ThinkServer RD440 Скачать руководство пользователя страница 102

Страница: 102 / 248

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Note:

Depending on the model, your server might look slightly different from the illustrations in this topic.

To remove the server cover, do the following:

1. Remove all media from the drives. Then, turn off all attached devices and the server.

2. Disconnect all power cords from electrical outlets.

3. Disconnect the power cords, Input/Output (I/O) cables, and all other cables that are connected to

the server.

4. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,

clean, and static-protective surface. See the

Rack Installation Instructions

that comes with the server.

5. Press the release button

in the direction as shown.

Figure 43. Pressing the release button

ThinkServer RD440 User Guide and Hardware Maintenance Manual

Содержание ThinkServer RD440

























































































































































































































































Результаты поиска

Содержание ThinkServer RD440

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkServer RD440, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание ThinkServer RD440

Отзывы:

Бренды по названию

Популярные бренды