Lenovo ThinkServer RD440 Скачать руководство пользователя страница 158

Страница: 158 / 248

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Notes:

• Ensure that the new microprocessor is the correct type your server supports. See “Features” on page 8.

When two microprocessors are installed, both must have the same core voltage and core speed.

• Use any documentation that comes with the microprocessor option kit and follow those instructions in

addition to the instructions in this topic.

• Your microprocessor, socket, and socket cover might look slightly different from the illustrations in this

topic.

To replace the microprocessor, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,

clean, and static-protective surface. See the

Rack Installation Instructions

that comes with the server.

3. Remove the server cover. See “Removing the server cover” on page 89.

4. Remove the cooling shroud. See “Removing and reinstalling the cooling shroud” on page 97.

5. Remove the heat sink. See “Installing or replacing a heat sink” on page 139.

6. Gently press down the small handle on the microprocessor socket and then pull the handle slightly

outward to release it from the secured position. Then, pivot the handle upward to the fully open position.
Then, gently press the microprocessor retainer to open it.

Figure 95. Opening the small handle and microprocessor retainer

146

ThinkServer RD440 User Guide and Hardware Maintenance Manual

Содержание ThinkServer RD440

























































































































































































































































Результаты поиска

Содержание ThinkServer RD440

Отзывы:

Похожие инструкции для ThinkServer RD440

Бренды по названию

Популярные бренды

Lenovo ThinkServer RD440, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание ThinkServer RD440

Отзывы:

Похожие инструкции для ThinkServer RD440

Бренды по названию

Популярные бренды