Lenovo ThinkServer RD440 Скачать руководство пользователя страница 118

Страница: 118 / 248

10. Reconnect any cables that you have disconnected.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation, go to “Completing the parts replacement” on page 206.

Removing a memory module

Attention:

Do not open your server or attempt any repair before reading and understanding “Safety information”

on page iii and “Guidelines” on page 87.

This topic provides instructions on how to remove a memory module.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Note:

Ensure that you consider and follow the memory module installation rules when performing the

operation. See “Memory module installation rules” on page 101.

To remove a memory module, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,

clean, and static-protective surface. See the

Rack Installation Instructions

that comes with the server.

3. Remove the server cover. See “Removing the server cover” on page 89.

4. Remove the cooling shroud. See “Removing and reinstalling the cooling shroud” on page 97.

5. Locate the memory slots on the system board and read the memory module installation rules. See

“Memory module installation rules” on page 101.

6. Disconnect any cables that might impede your access to the memory slots.

7. Locate the memory module that you want to remove and open the retaining clips on both ends of the

memory slot. Then, grasp the memory module by its edges and carefully pull it straight up to remove it
from the memory slot.

Figure 63. Removing a memory module

8. If you are instructed to return the old memory module, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

106

ThinkServer RD440 User Guide and Hardware Maintenance Manual

Содержание ThinkServer RD440

























































































































































































































































Результаты поиска

Содержание ThinkServer RD440

Отзывы:

Похожие инструкции для ThinkServer RD440

Бренды по названию

Популярные бренды

Lenovo ThinkServer RD440, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание ThinkServer RD440

Отзывы:

Похожие инструкции для ThinkServer RD440

Бренды по названию

Популярные бренды