Lenovo 6241 Скачать руководство пользователя

Страница: 125 / 1990

Lockbar

USB
Hypervisor
key

Air baffle

Standard I/O book

If you have other devices to install or remove, do so now. Otherwise, go to “Completing the installation” on
page 117.

Installing the drive backplanes

This information provides instructions on how to install the drive backplanes in the server.

The following topics provide instructions on how to install the supported drive backplanes in the server.

Installing the 8x1.8-inch hot-swap drive backplane assembly

This information provides instructions on how to install the 8x1.8-inch drive backplane in the server.

Notes:

• The SAS/SATA adapter that you install in the server to control the backplane must be capable of

supporting two internal, 4-lane SAS/SATA signal connectors.

• The server must have a minimum of two compute books with microprocessors and memory installed to

support the controller, backplane, and drives.

• When you install a 8x1.8-inch drive backplane assembly, the drive IDs that are indicated on the server

front bezel will no longer be valid. Use the drive labels that come with the backplane to renumber the drive
IDs on the bezel.

• For more information about drive IDs, see “Drive IDs” on page 67. For more information about the

supported drive backplane configurations, see “Supported drive backplane configurations” on page 69.

Chapter 2

Installing optional devices

111

Содержание 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 6241

Отзывы:

Похожие инструкции для 6241

Бренды по названию

Популярные бренды

Lenovo 6241, Инструкция по установке и обслуживанию

Результаты поиска

Содержание 6241

Отзывы:

Похожие инструкции для 6241

Бренды по названию

Популярные бренды