Lenovo 10AX Скачать руководство пользователя страница 182

Страница: 182 / 260

6. Grasp the WiFi adapter card that is currently installed and gently pull it out of the slot.

Figure 121. Removing the WiFi adapter card

Note:

The card fits tightly into the card slot. If necessary, alternate moving each side of the card a

small amount until it is removed from the card slot.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 186.

Removing the Wi-Fi card module

To remove the Wi-Fi card module, do the following:

1. Remove the Wi-Fi adapter card. See “Removing the Wi-Fi adapter card” on page 175.

2. Remove the two screws that secure the Wi-Fi card module.

Figure 122. Removing the screws that secure the WiFi card module

176

ThinkCentre M73 Hardware Maintenance Manual

Содержание 10AX





































































































































































































































































Результаты поиска

Содержание 10AX

Отзывы:

Похожие инструкции для 10AX

Бренды по названию

Популярные бренды

Lenovo 10AX, Руководство по обслуживанию

Результаты поиска

Содержание 10AX

Отзывы:

Похожие инструкции для 10AX

Бренды по названию

Популярные бренды