Lenovo 10AX Скачать руководство пользователя страница 172

Страница: 172 / 260

8. Lift the microprocessor straight up and out of the microprocessor socket.

Notes:

• Your microprocessor and socket might look different from the one illustrated.

• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.

• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be

kept as clean as possible.

Figure 110. Removing the microprocessor

9. Ensure that the small handle is in the raised position and the microprocessor retainer is fully open.

10. Remove the protective cover that protects the gold contacts of the new microprocessor.

166

ThinkCentre M73 Hardware Maintenance Manual

Содержание 10AX





































































































































































































































































Результаты поиска

Содержание 10AX

Отзывы:

Похожие инструкции для 10AX

Бренды по названию

Популярные бренды

Lenovo 10AX, Руководство по обслуживанию

Результаты поиска

Содержание 10AX

Отзывы:

Похожие инструкции для 10AX

Бренды по названию

Популярные бренды