Lenovo 10AX Скачать руководство пользователя страница 113

Страница: 113 / 260

6. Lift the small handle

and open the retainer

to access the microprocessor

Figure 35. Accessing the microprocessor

7. Lift the microprocessor straight up and out of the microprocessor socket.

Notes:

• Your microprocessor and socket might look different from the one illustrated.

• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.

• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be

kept as clean as possible.

Figure 36. Removing the microprocessor

8. Ensure that the small handle is in the raised position and the microprocessor retainer is fully open.

9. Remove the protective cover that protects the gold contacts of the new microprocessor.

Chapter 9

Replacing FRUs (machine types: 10B0, 10B1, 10B2, and 10B3)

107

Содержание 10AX





































































































































































































































































Результаты поиска

Содержание 10AX

Отзывы:

Похожие инструкции для 10AX

Бренды по названию

Популярные бренды

Lenovo 10AX, Руководство по обслуживанию

Результаты поиска

Содержание 10AX

Отзывы:

Похожие инструкции для 10AX

Бренды по названию

Популярные бренды