Leica CM1860 Скачать руководство пользователя страница 78

Страница: 78 / 108

Version 2.0, Revision N

Cleaning, Disinfection, Maintenance

2. Detach the metal ring

in the direction of the arrow

and carefully pull the lamp out of the holder with your right hand

Fig. 64

Installation of the new lamp

1. Carefully slide the metal ring

over the lamp from the left

(

→

"Fig. 65")

Fig. 65

2. Push the lamp into the holder on the left side until it engages.

3. Screw the metal ring onto the holder, then hold the lamp with both hands and carefully push it

into the clips

4. Reinsert the sliding window.

5. Connect the instrument to the power supply again and switch it on.

Warning

•

If any metallic mercury is released, handle it carefully and dispose of it properly.

•

Dispose of the UVC lamp separately.

9.3.4 Replacing the LED illumination

The LED illumination is designed for maximum life span. In case of damage, please contact Leica

customer service to arrange replacement. For further details, see

(

→

P. 105 – 11. Warranty and Service)

Содержание CM1860













































































































Результаты поиска

Содержание CM1860

Отзывы:

Leica CM1860, Инструкция по эксплуатации, Страница: 78 / 108

Результаты поиска

Содержание CM1860

Отзывы: