Leica CM1860 Скачать руководство пользователя страница 60

Страница: 60 / 108

Version 2.0, Revision N

Daily Use of the Instrument

Note

If several blade/knife holders are cleaned at the same time, the parts must

NOT

be mixed up! Failure to

adhere to this may result in sectioning problems!

Disinfection

•

At room temperature, wipe contaminated surfaces with a paper towel moistened with alcohol-based

disinfectants.

Warning

Also observe the warning messages in

(

→

P. 71 – 9. Cleaning, Disinfection, Maintenance)

Trimming the specimen

Warning

Take care when handling microtome knives and disposable blades. The cutting edge is extremely sharp

and can cause serious injuries! For that reason, always wear the cut-resistant safety gloves included in

the standard scope of delivery!
Always clamp the specimen

BEFORE

clamping the knife or the blade.

Lock the handwheel and cover the knife edge with the safety guard prior to any manipulation of knife/

blade or specimen, prior to changing the specimen block and during all work breaks!

1. Insert the pre-cooled knife/disposable blade into the knife/blade holder.

2. Adjust the knife holder to an appropriate clearance angle. Settings from 4° - 6° (knife holder

CN) and 2° - 5° (blade holder CE, CE-TC and premium blade holder) are suitable for most

applications.

3. Align the knife/knife holder or blade/blade holder with the specimen.

Move the safety guard (knife holder CN) to the side or fold the glass anti-roll guide (blade holder

CE, CE-TC and premium blade holder) over to the side.

5. Unlock the handwheel.

6. To trim the specimen, move the specimen towards the knife using the coarse feed buttons. Trim

the specimen down to the required sectioning plane by turning the handwheel

(

→

P. 39 – 6.2.7 Setting the section thickness)

7. For section removal, fold the anti-roll guide on the knife and align it with the blade edge.

8. Readjust the anti-roll guide if necessary

(

→

P. 51 – Adjusting the anti-roll guide system)

for

the blade holders and

(

→

P. 57 – Clearance angle adjustment)

the knife holders.

Содержание CM1860













































































































Результаты поиска

Содержание CM1860

Отзывы:

Leica CM1860, Инструкция по эксплуатации, Страница: 60 / 108

Результаты поиска

Содержание CM1860

Отзывы: