Leica CM1860 Скачать руководство пользователя страница 35

Страница: 35 / 108

Leica CM1860/CM1860 UV

Operating the Instrument

Status: Short disinfection aborted

The LED for short disinfection flashes, and the UVC lamp is off. The operator must press the

UVC

button

to confirm. The disinfection system goes into ready mode, or, if the lifetime of the UVC lamp has expired,

both LEDs flash alternately.

Status: Long disinfection aborted

The LED for long disinfection flashes, and the UVC lamp is off. The operator must press the

UVC

button

to confirm. The disinfection system goes into ready mode, or, if the lifetime of the UVC lamp has expired,

both LEDs flash alternately.

Note

The disinfection mode is aborted as soon as the sliding window of the cryostat is open or the operator

presses the

UVC

button. In the case of a power failure, when the instrument restarts it checks whether

it was running a disinfection cycle, and if so which one. The LED of the determined disinfection cycle

(short or long disinfection) flashes.

6.2

Configuring the desired values

6.2.1 Setting the time

Fig. 15

Use the function button labeled with a clock symbol to set the time of day.

•

Set the current time using the

Plus

and

Minus

buttons.

•

Pressing and holding the

Plus

Minus

button continuously increases or decreases the time

(auto-repeat function).

Содержание CM1860













































































































Результаты поиска

Содержание CM1860

Отзывы:

Leica CM1860, Инструкция по эксплуатации, Страница: 35 / 108

Результаты поиска

Содержание CM1860

Отзывы: