Leica CM1860 Скачать руководство пользователя страница 63

Страница: 63 / 108

Leica CM1860/CM1860 UV

Daily Use of the Instrument

7.6.3 Manual defrosting of the quick freeze shelf

Warning

The quick freeze shelf can become hot during the defrosting process. Therefore, do not touch it!

In case of heavy frost formation on the quick freeze shelf, a defrost can be activated manually

(

→

P. 38 – 6.2.5 Manual defrosting of the quick freeze shelf)

, which can be terminated when required.

Note

To avoid frost formation always put the cover on the quick freeze shelf. Always cover the quick freeze

shelf during breaks and overnight.

7.7 Ending work

7.7.1 Finishing the daily routine

1. Lock the handwheel.

2. Take the knife/blade out of the knife/blade holder and put it back into the knife case/blade

dispenser in the cryochamber.

3. Remove frozen section waste with a cold brush.

4. Empty the section waste tray.

5. Clean the storage shelves and brush shelf.

Note

•

Only common detergents and alcohol-based disinfectants should be used for cleaning.

•

All components removed from the cold environment will collect condensation. Therefore, dry them

thoroughly before placing them back into the cryostat.

•

Remove all tools and supplies that would prevent the UVC light from reaching the chamber walls

and shelves.

6. Remove all specimen material from the cryostat.

7. Attach the cover for the freeze shelf.

8. Close the sliding window.

9. Switch off the chamber illumination and start the UVC disinfection.

10. Lock control panel 1

(

→

P. 33 – Fig. 14)

using the

Key

button.

11. Do

NOT

switch off the instrument using the circuit breaker, as otherwise no cooling takes place.

Содержание CM1860













































































































Результаты поиска

Содержание CM1860

Отзывы:

Leica CM1860, Инструкция по эксплуатации, Страница: 63 / 108

Результаты поиска

Содержание CM1860

Отзывы: