Leica CM1860 Скачать руководство пользователя страница 40

Страница: 40 / 108

Version 2.0, Revision N

Operating the Instrument

6.3 Retraction

Note

The factory default setting for the retraction is

Enabling retraction:

When switching on the instrument (in the initialization phase), press the

Plus

button

the handwheel is at the 6 o'clock position or the specimen head is "down", the yellow LED next to

Retract

is illuminated. When the instrument is switched off, this status is stored.

Disabling retraction:

When switching on the instrument (in the initialization phase), press the

Plus

button

the handwheel is at the 6 o'clock position or the specimen head is "down", the yellow LED next to

Retract

is not illuminated and remains off even during sectioning.

6.4 Display lock

Fig. 22

After the display is locked using the

Key

button

(press and hold for 5 sec.), set values can

NO LONGER

be changed.

Note

Only the UVC disinfection can still be enabled/disabled by pressing the

UVC

key.

To unlock the display, press and hold the

Key

button

again for 5 seconds.

When the display is locked, the LEDs between the hour and the minute display on the time panel are

Содержание CM1860













































































































Результаты поиска

Содержание CM1860

Отзывы:

Leica CM1860, Инструкция по эксплуатации, Страница: 40 / 108

Результаты поиска

Содержание CM1860

Отзывы: