Leica CM1860 Скачать руководство пользователя страница 105

Страница: 105 / 108

105

Leica CM1860/CM1860 UV

Warranty and Service

11. Warranty and Service

Warranty

Leica Biosystems Nussloch GmbH guarantees that the contractual product delivered has been subjected

to a comprehensive quality control procedure based on the Leica in-house testing standards, and that

the product is faultless and complies with all technical specifications and/or agreed characteristics

warranted.

The scope of the warranty is based on the content of the concluded agreement. The warranty terms of

your Leica sales organization or the organization from which you have purchased the contractual product

shall apply exclusively.

Service information

If you are in need of technical customer support or spare parts, please contact your Leica representative

or the Leica dealer where you purchased the instrument.

Please provide the following information about the instrument:

•

Model name and serial number of the instrument.

•

Location of the instrument and name of a contact person.

•

Reason for the service call.

•

Delivery date.

For Russian Federation only

BioLine LLC

Pinsky lane 3 letter A, 197101, Saint Petersburg, the Russian Federation

E-mail: [email protected]

Tel: (812) 320-49-49 / Fax: (812) 320-49-40

Service Hotline: 8-800-333-00-49

Decommissioning and disposal

The instrument or parts of the instrument must be disposed of according to existing applicable,

local regulations. Despose of UVC tube seperately.

For Russian Federation only

The instrument or parts of the instrument must be disposed of according to existing applicable, local

regulations referred to class “A” (non-hazardous waste). Dispose of

UVC

tube separately. The

UVC

fluorescent tube must be disposed of according to existing applicable, local regulations referred to class

“G(

)” (toxicology-hazardous waste of 1 (first) danger class).

Содержание CM1860













































































































Результаты поиска

Содержание CM1860

Отзывы:

Leica CM1860, Инструкция по эксплуатации, Страница: 105 / 108

Результаты поиска

Содержание CM1860

Отзывы: