23
State and City
Select the
State
first and the available options for the
City
will
change appropriately.
Once the
City
is selected, the
Latitude
,
Longitude
, and
Hours
Behind GMT
will display automatically.
Select
SEND
. Once again, point the LMCT-100-2 at an infrared
sensor and press Select. You return to the
Panel Setup
screen.
Date and Time
L o c a t i o n S e t t i n g s
D a t e a n d T i m e
P a n e l P r o g r a m m i n g
P a n e l S t a t u s
P a n e l S e t u p
D a t e a n d T i m e S e t
SEND
DSTSTD
DONE
Ye a r :
< 2 0 1 4 >
M o n t h :
< A u g u s t >
D a t e :
< 1 4 >
H o u r ( 2 4 H o u r ) :
< 1 6 >
M i n u t e :
< 3 7 >
The date and time are used for schedules, including both
manually set events and sunrise/sunset determination (in
conjunction with the location settings).
Scroll to each field and set the value. An illegal date (for
example, February 30) cannot be entered.
NOTE:
There is no clock in the LMCT-100, so the time values
will not change if you remain on this screen longer than
a minute.
After selecting all values, scroll to
DSTSTD
and press Select.
D S T A u t o m a t i c R u l e s
DONE
B e g i n s :
< 2 n d >
< S u n >
< M a r >
D S T C o n fi g u r a t i o n
BEGINS
ENDS
DONE
F o l l o w s D S T:
< Ye s >
M e t h o d :
< A u t o >
This screen determines if the panel will follow Daylight Savings
Time. If you set
Follows DST
to “Yes”, you can choose a value
of “Auto” or “Manual” for
Method
. Select
BEGINS
.
NOTE:
If you set
Follows DST
to “No”, the
Method
field
disappears. Highlight
DONE
and press Select, or press
to return to the
Date and Time Set
screen.
Depending on whether you choose a value of Auto or Manual,
the screen changes. For Auto, you select the week, the day of
the week, and the month. For Manual, you select a specific date
(for example, March 20th). Select
DONE
to return to the
DST
Configuration
window. Repeat the process for the end of DST
by pressing
ENDS
. Then select
DONE
to return to the
Date and
Time Set
screen.
Panel Programming
L o c a t i o n S e t t i n g s
D a t e a n d T i m e
P a n e l P r o g r a m m i n g
P a n e l S t a t u s
P a n e l S e t u p
The functions in this menu are used to define schedules, which
consist of events that are used by Groups, to control groups of
relays and room controllers. For details on Groups, see
NOTE:
While bridges can store group data, schedules are
specific to panels. So you can set up groups within
a panel and a bridge, and then have the panel send
schedule events to both its internal groups and an
external bridge.
Schedules
6 0 3 9 8 1 2 1 0
S c h e d u l e s
H o l i d a y s
P a n e l P r o g r a m m i n g
Select
Schedules
, point the LMCT-100-2 at the infrared sensor
on the LMRD board and press Select to open the
Program
Schedule
screen.
On this set of screens, you assign an event to a group, and set
one action for that event. For each event, you specify the time
the event occurs. You also specify whether the event will occur
on a per day basis. Additionally, you specify whether the event
will occur on any day designated as a holiday.
E v e n t N u m b e r :
< 1 >
Ty p e :
< N o r m a l H o u r s >
T i m e :
< 0 7 > : < 0 0 >
G r o u p :
< 1 >
P r o g r a m S c h e d u l e
ACTIVE DAYS
DONE DELETE SEND
Event Number
You can schedule up to 254 date and time based events per
panel. Each event is assigned to a group, and determines one
action for the group. For each event, you specify the time the
event occurs. You also specify the days of the week in which the
event will occur. Additionally, you specify whether the event will
occur on any day designated as a holiday.
Type
This determines the action for the event. Possible values:
• After Hours – Transitions Groups to After Hours
(unoccupied) state
• Normal Hours – Transitions Groups to Normal Hours
(occupied) state
• On – Turns group loads ON without changing the current
occupancy status
• Off – Turns group loads OFF without changing the current
occupancy status
• Do Nothing – No action
Time
Time the event will occur
Group
Group the event is assigned to
Select
ACTIVE DAYS
M o n :
< Y >
Tu e : < Y >
We d : < Y >
T h u : < Y >
F r i : < Y >
S a t : < N >
S u n : < N >
H o l i d a y : < N >
S c h e d u l e A c t i v e O n
DONE
For each day of the week, select whether the event will be active
(Yes or No). Additionally, select whether the event will be active
on holidays. (You determine which days are holidays in the
Holidays
screen.)
Select
DONE
to return to the
Program Schedule
screen.
Select
SEND
. Point the LMCT-100-2 at the infrared sensor on
the LMRD board and press Select. You return to the
Program
Schedule
screen, where you can program the next event.
When finished, select
DONE
to return to the
Panel
Programming
screen.
The
DELETE
command will delete the current event from memory.