8. PRESET FEATURE (PSET)
72
8. PRESET
FEATURE
(PSET)
You can use the preset feature to register and load panel settings. Also, you can use the same
settings on multiple LV 5380s by copying all of the presets to USB memory.
There are two kinds of presets: comprehensive presets (usually just referred to as presets) and
display mode presets.
Even if you initialize the settings by following the procedure described in section 5.7.1,
“Initializing the Settings,” the presets that have been registered will not be deleted.
●
Presets
You can register up to 30 different sets of all of the panel settings (some settings are not
included).
1
Registering a Preset
Set the LV 5380 to the settings that you want to register, and then press and hold PSET.
Press F•1 FULL PRESET in the preset registration menu to register the settings.
Loading a Preset
Press PSET, and load the preset from the preset menu.
●
Display Mode Presets
You can register up to five different sets of panel settings for each different display mode.
2
When you use an individual setting configuration for a particular display, the settings for the
other displays are not affected.
Registering a Display Mode Preset
Set the LV 5380 to the settings that you want to register, and then press and hold PSET.
Press F•2 FUNCTION PRESET in the preset registration menu to register the settings.
Loading a Display Mode Preset
After setting FUNCTION PRESET to ON in the preset registration menu, press PIC, WFM,
VECT, AUDIO, or STATUS. Load the preset from the display mode preset menu.
1
The date and time are not included.
2
The five different display modes are the picture, video signal waveform, vector, audio, and status displays.
*
The preset registration menu and the preset menu do not automatically disappear after a certain amount
of time has passed. To hide these menus, press PSET again.