11. VIDEO SIGNAL WAVEFORM DISPLAY (WFM)
104
1 Error
counter
The error counter, the current time, and the elapsed time are displayed here. For details,
see section 14.1, “General Status Display Explanation.”
2 Gain
The video signal waveform gain is displayed here. You can set the gain to a value
between 0.2 and 10 by setting GAIN MAG and GAIN VARIABLE.
[Reference] GAIN
MAG
→
Section 11.4.4, “Setting the Fixed Vertical Gain”
GAIN VARIABLE
→
Section 11.4.5, “Setting the Variable Vertical Gain”
3 Selected
line
You can display the waveform of the selected line.
[Reference] Section
11.5.1, “Displaying the Waveform of the Selected Line,”
Section 11.5.2, “Selecting a Line”
4 Sync
signal
EXT appears here when an external sync signal is being used.
[Reference] Section
11.5.4, “Switching to an External Sync Signal”
5 Display
format
The video signal waveform display format (YCbCr, XYZ, GBR, YGBR, RGB, YRGB, or
COMPOSITE) is displayed here.
[Reference] Section
11.6.1, “Selecting a Display Format,”
Section 11.6.2, “Displaying the GBR or RGB Signal Simultaneously with the Luminance
Signal”
6 Filter
FILTER LPF appears here when FILTER has been set to LOW PASS.
[Reference] FILTER
→
Section 11.6.5, “Selecting a Filter”
7
Thumbnails (audio meter)
You can display the audio meter using thumbnails. You can turn the audio meter display
off if you want to.
[Reference] Section
11.6.7, “Displaying the Audio Meter,”
Section 11.6.8, “Selecting the Audio Meter Display Format”
8 Thumbnail
(picture)
You can display the picture using a thumbnail. You can turn the picture display off if you
want to.
[Reference] Section
11.6.9, “Displaying the Picture”
9 Cursor
You can measure the time or cursor amplitude using cursors.
[Reference] Section