5. SYSTEM SETTINGS (SYS)
46
To correctly the display the amount of remaining battery power, you need to select the battery
type. To select the battery type, follow the procedure below.
The LV 5380 displays F•3 BATTERY if it has a battery mount option installed.
Procedure
SYS
→
F•5 next menu
→
F•3 BATTERY
Settings
IDX:
Select this option when you are using a V-mount battery. If the battery that you
are using does not support remaining battery power output (analog), select
OTHERS.
IDX is the default setting if the LV 5380 is equipped with OP73.
ANTON-BA: Select this option if you are using a battery made by Anton/Bauer.
ANTON-BA is the default setting if the LV 5380 is equipped with OP74.
OTHERS:
Select this option if you are using a battery other than one of the ones listed
above.
The amount of remaining battery power will only be displayed correctly if you
are using a 14.4-V lithium-ion battery. Also, because the remaining power is
detected based on the battery connector voltage, it may not be displayed
correctly.
OFF:
The remaining battery power is not displayed.
5.10
License Settings
5.10.1 Installing
Options
To use an option that requires a license, you must enter the appropriate license key.
A license key is a key code that activates an option on the LV 5380. Leader will send you a
license key when you purchase an option. Before purchasing an option, prepare the MAC
address and the serial number of your LV 5380.
*1, *2
Each LV 5380 requires a unique
license key. You cannot use the same key for multiple instruments.
*1
You can view the MAC address from the license display.
*2
The serial number is printed on a label on the rear panel.
To install an option, follow the procedure below.
1. Press
SYS.
The system menu appears.
2. Press F•5 next menu.