11. VIDEO SIGNAL WAVEFORM DISPLAY (WFM)
128
11.7.2
Selecting the Cursor Type
To select whether to move the two cursors separately or simultaneously, follow the
procedure below. You can also switch between cursor types by pressing F•D 1.
Procedure
WFM (press and hold)
→
F•5 CURSOR
→
F•3 FD VAR TRACK
Settings
ON:
The cursors move simultaneously. Triangles appear at the ends of each
cursor.
OFF:
The cursors move separately. This is the default setting.
11.7.3 Moving
the
Cursors
To move the cursors, follow the procedure below.
Setting F•3 FD VAR TRACK and pressing F•D 1 changes the same setting.
●
To move both cursors separately
Move the REF (blue) cursor with F•D 1 REF, and move the DELTA (green) cursor with F•D
2 DELTA.
You can move both cursors simultaneously by pressing F•D 1 to set it to TRACK.
You can switch the positions of the REF and DELTA cursors by pressing F•D 2.
Procedure
WFM (press and hold)
→
F•5 CURSOR
→
F•3 FD VAR TRACK OFF
→
F•D 1 REF
→
F•D 2 DELTA
●
To move both cursors simultaneously
Move both cursors with F•D 1 TRACK. You can move both cursors separately by pressing
F•D 1 to set it to REF.
Move the DELTA (green) cursor with F•D 2 DELTA. You can switch the positions of the REF
and DELTA cursors by pressing F•D 2.
Procedure
WFM (press and hold)
→
F•5 CURSOR
→
F•3 FD VAR TRACK ON
→
F•D 1 TRACK
→
F•D 2 DELTA