Leader LV 5380 OP72 Скачать руководство пользователя страница 224 | Manualshive

Страница: 224 / 232

Leader LV 5380 OP72 Скачать руководство пользователя страница 224

16. APPENDIX

211

16.2

Firmware Revision History

This manual was written for firmware version 4.4.
You can view the firmware version in the display that appears when you turn on the power.

●

Ver.

4.4

• A feature that does not automatically clear the function menu has been added.
• Talley display response has been improved on the OP72 (REMOTE & TALLY).

●

Ver.

4.3

• Side-by-side and top-and-bottom inputs have been added to the 3D assist display in

the multi-screen display.

• A flicker display feature has been added to the 3D assist display in the multi-screen

display.

• A contrast adjustment function has been added to the video signal waveform and

vector displays.

●

Ver.

4.2

• Support for the XYZ signal format has been added.

●

Ver.

4.1

• A feature for displaying up to two horizontal markers has been added to the video

signal waveform display.

• A 2.8 MHz low-pass filter for gamut errors has been added to the status display (only

for HD).

●

Ver.

3.8

• WFM+PIC and VEC+PIC have been added to the display formats in the 2-channel

display in the multi-screen display. (The waveforms can be displayed in a wipe display,
and the captured waveform colors match the displayed colors.)

• The following additions have been made to the 3D assist display in the multi-screen

display.
1. CHECKER has been added to the display formats.
2. A disparity measurement feature has been added.
3. A video signal waveform wipe display feature has been added.
4. Support has been added for REAL displays of pictures.
5. A feature for displaying the time codes of both channels at the same time has been
added.

• The grid menu and histogram menu hierarchies in the 3D assist display in the

multi-screen display have been improved.

●

Ver.

3.4

•  A 3D assist feature has been added to the multi-screen display.
•  A histogram display feature has been added to the multi-screen display.
•  V and R% have been added to the pseudo-composite cursor measurement units on

the video signal waveform display.

• A luminance error detection feature has been added to the status display.
• A feature for displaying the phase difference between channel A (the reference) and

channel B has been added to the status display.

«
...
222
223
224
225
226
...
»

Содержание LV 5380 OP72









































































































































































































































Отзывы:

Нет отзывов