LAVAZZA BLUE LB 3300, Инструкция по использованию и установке

Страница: 33 / 64

29
© by N&W GLOBAL VENDING S.p.A. 1006 83288-00
MDB protocol Audit
Aud. 1 Money in the tubes
Money present in the change tube that moment
Aud. 2 Money to the tubes
Money sent to the change tubes
Aud. 3 Money to the box
Money sent to the coin box
Aud. 4 Change return
Total money returned
Aud. 5 Excess
Excess money. Extra amounts paid by the customer that
were not returned (in the event there was no money
available for return)
Aud. 6 Release tubes
Value of coins dispensed with the “Tubes control” function
Aud. 7 Filling tubes
Value of money cashed with the manual filling function
Aud. 8 Cash sales
Value of total sales with cash money (coins + bills)
Aud. 9 Cashed bills
Value of cashed bills
Audi. 10 Charge key
Value of money changed into the key
Audi. 11 Sales with key
Value of money cashed for dispensing with key
Aud. 12 Money dispensed manually
Value of coins dispensed manually with the dispensing
buttons on the coin mechanism.
SELECTION COUNTER DISPLAY
This function is used to enable/disable the display of the
total number of drinks sold since the last statistic reset,
during the start-up phase of the machine.
PRINTING
Connect an RS-232 serial printer with a Baud rate of 9600,
8 data bit, no parity, 1 stop bit to the serial port located on
the push button board, to print all the statistics described
in the section “Displaying the statistics”. The hardcopy
printout will also contain the machine code, the date and
the software version.
Statistics can be printed partially or totally.
To connect the printer, do as follows:
- press the confirm print button “ ”, displaying the mes-
sage “Confirm?”;
- connect the printer before confirming;
- press the confirm button “ ” again to start printing.
TEST
DISPENSING
With this function it is possible to obtain, with the door open
and without inserting any money, for each selection dis-
pensing of:
- complete selection
- water only
- powder only
- without accessories (cup, sugar and stirrer)
- accessories only
SPECIAL FUNCTIONS
By accessing this function it is possible to:
- Unit rotation
- Operate the brewer unit applying pressure to the hydrau-
lic piston
- Wash the unit
- Release a coffee capsule
- Open a solenoid valve to allow the intake of air in the event
of emptying the boiler for maintenance
- Manually install boiler.
AUTOTEST
This function allows testing of the main machine compo-
nents.
Press button “ ” and the message “AUTOTEST” will start
blinking.
Press button “ ” to cancel the operation, confirm with
button “ ” to start the autotest routine.
In a sequence:
- Fan functioning test for 2 seconds
- The doser units are activated for 2 seconds
- The mixers are activated for 2 seconds
- A cup is released
- A stirrer is released
- Rotation of the brewer unit
- Wash button test
- Waste container switch; the machine awaits until the
waste container micro-switch is manually operated
- Switching on of the dispensing compartment lamp
- Push-button panel test; the machine will display the
number of the button which must be pressed and awaits
the actuation before going to the next button
- Temperature probe functioning test
- Buzzer functioning test
- Coin mechanism functioning test