LAVAZZA BLUE LB 3300, Инструкция по использованию и установке

Страница: 32 / 64

© by N&W GLOBAL VENDING S.p.A.
28
1006 83288-00
RESETTING RELATIVE STATISTICS
Statistics can be reset either globally (all types of data) or
partially for:
- selections
- discounts/overprice
- failures
- coin mechanism data
Press the confirm button “ ”, and the message “Confirm?”
starts blinking.
Press the confirm button “ ”, the message “Working” is
displayed for a few seconds and all statistics are reset.
BDV protocol Audit
The information regarding the coin mechanism indicates
the actual currency of:
Aud. 1 Money in the tubes
Money present in the change tube that moment
Aud. 2 Money to the tubes
Money sent to the change tubes
Aud. 3 Money to the box
Money sent to the coin box
Aud. 4 Return of change
Total money returned
Aud. 5 Dispensed money
Total money dispensed manually
Aud. 6 Excess
Excess money. Extra amounts paid by the customer that
were not returned (in the event there was no money
available for return)
Aud. 7 Total sales
Total value of sales
Aud. 8 Exact change
Value of sales in the “no change” condition.
Aud. 9 Mixed dispensing
Total value of dispensing paid differently; for example also
other types of payment (C.P.C., token).
Aud. 10 Manual filling
Money inserted in the coin mechanism through the manual
filling function.
ENERGY SAVING
In order to save electric energy when the machine is not in
use, this function is used to switch off the boiler heating.
2 switch-off time bands can be programmed on a weekly
basis; the week days are identified by a progressive
number (1=Monday, 2=Tuesday etc.).
The same time band cannot include days from different
weeks.
If time bands are set overlapping, the machine will remain
switched on for the shorter period.
For example, in order to set energy saving time bands to
run the vending machine from 07.00 to 22.00 during the
week and leave it switched off on the weekend, the time
bands should be set, using the special menu, as indicated
in the table below.
y a D 1 2 3 4 5 6 7
1 d n a b
t r a t s 0 0 . 0 0 0 0 . 0 0 0 0 . 0 0 0 0 . 0 0 0 0 . 0 0 0 0 . 0 0 0 0 . 0 0
d n e 0 0 . 7 0 0 0 . 7 0 0 0 . 7 0 0 0 . 7 0 0 0 . 7 0 9 5 . 3 2 9 5 . 3 2
2 d n a b
t r a t s 0 0 . 2 2 0 0 . 2 2 0 0 . 2 2 0 0 . 2 2 0 0 . 2 2 0 0 . 0 0 0 0 . 0 0
d n e 9 5 . 3 2 9 5 . 3 2 9 5 . 3 2 9 5 . 3 2 9 5 . 3 2 0 0 . 0 0 0 0 . 0 0
BASE CABINET
This function must be enabled if the machine is installed
with the base cabinet and the used capsules are dis-
charged into the bag housed in the base cabinet; when
enabling this function the capsule counter control is not
necessary.
STATISTICS
Data on the machine operations is stored in both general
counters and relative counters, which can be reset without
losing total data.
GENERAL COUNTER
An electronic counter stores the total of all selections made
since the last reset.
The counter can be read and reset.
DISPLAYING GENERAL STATISTICS
When pressing the confirm button “ ” the stored data is
sequentially displayed, and namely:
1 - counter by single selection;
2 - counter by time bands;
3 - discount counter;
4 - failure counter;
5 - coin mechanism data.
RESETTING GENERAL STATISTICS
Statistics can be reset globally:
1 - counter by single selection;
2 - counter by time bands;
3 - discount counter;
4 - failure counter;
5 - coin mechanism data.