LAVAZZA BLUE LB 3300, Инструкция по использованию и установке

Страница: 13 / 64

9
© by N&W GLOBAL VENDING S.p.A. 1006 83288 - 00
- in order to unscrew the wheels, simply block the disk fitted
on the mixer shaft with a finger;
CLEANING THE WASTE TRAYS
The used capsules trays and dispensing compartment can
be removed easily for emptying and cleaning.
The used capsules tray can be removed only with the door
open; the dispensing compartment tray can be removed
also with the door closed.
In order to remove the dispensing compartment tray, lift it
slightly and pull towards the front of the machine, making
sure to move it to the right to allow its tail to come out from
the door zone.
- wash all parts with detergent (using the doses indicated
by the manufacturer) being sure that all visible residue
and product layers are mechanically removed, using a
brush if necessary;
Disinfection should be carried out using sanitising prod-
ucts.
- Soak all components for approx. 20 minutes in a con-
tainer filled with the previously prepared sanitising solu-
tion;
- reinstall the feeders and the water funnels;
- reinstall the powder deposit drawers and the powder
funnels after thoroughly rinsing and drying them.
After reinstalling all parts the following is however
required:
- enter into “Filler” mode to clean the mixers (see relevant
paragraph) and add a few drops of the sanitising solution
in the various funnels.
- After disinfection thoroughly rinse all components to
ensure that all residue of the detergent solution is re-
moved.
CLEANING THE WATER SUPPLY TANK
(O
PTIONAL
)
For machines equipped with a water tank inside the
support cabinet, at least once a week, such tank must be
sanitised with the sanitising product used for the mixers.
The inserts, located inside the dispensing compartment
tray, when inserted into place prevent removal with the
door closed.
For safety reasons, when removing the trays, special
switches disconnect the power from the machine and
signal the absence of the tray to the control software.
Fig. 9
Fig. 10
1 - Dispensing compartment drip tray
2 - Inserts seats
3 - Withdrawal prevention inserts
4 - Coffee waste tray
5 - Tray detection switch
6 - Tray tail