LAVAZZA BLUE LB 3300, Инструкция по использованию и установке

Страница: 26 / 64

© by N&W GLOBAL VENDING S.p.A.
22
1006 83288-00
TECH>
SET PARAMETERS
TECH>
CASH
Coffee out of service
The machine is locked upon reaching the number of coffee
selections set separately with the “selection counter” func-
tion.
Instant products out of service
The machine is locked upon reaching the number of selections
set with the “selection counter” function.
RESET
By confirming this function all current failures will be reset.
PROGRAMMING PARAMETERS
CASH
This set of functions controls all parameters regarding the
payment systems and the sales prices.
By selecting one of the systems it is possible to control its
functions.
EXECUTIVE
The following payments systems are available for the
Executive system:
- Standard
- Price Holding
- Coges
- U-Key
- Sida
VALIDATORS
When the “Validat. Lines” (line setting) function of the
“Technician” menu is displayed, the value of the 6 validator
coin lines can be changed.
BDV
The BDV protocol menus are used for defining the follow-
ing functions:
Type of vending
Setting the operating mode for multiple or single dispens-
ing. With multiple dispensing, the change is not automati-
cally returned after a successful selection; however the
credit is available for further selections. When pressing the
coin return button, the available credit is returned if its
value is lower than the maximum change value.
Credit control
This function enables/disables the return of credit if no
selections are made.
If enabled, this function allows the return of coins even if
the first selection was not dispensed.
If however a selection fails for any reason, the change will
be returned if requested.
Maximum credit
This function is used to define the maximum accepted
credit.
Maximum change
It is possible to set a limit to the total amount of change
returned by the coin mechanism when pressing the coin
return button or after a single dispensing serving.
Any credit exceeding the amount programmed with this
function will be cashed.
Accepted coins
It is possible to define which, among the coins recognised
by the validator, are to be accepted.
Check the label on the coin mechanism for the correct coin
to value matching, indicating the position of the coins.
Non accepted coins
This function programs the rejection of coins when in
“exact amount” mode.
Check the label on the coin mechanism for the correct coin
to value matching, indicating the position of the coins.
TECH>
FAILURES
TECH>
RESET FAILURES
SELECTION PRICES
Four different prices can be set for each selection accord-
ing to the programmed time bands for when the time table
option is enabled.
For each of the 4 time bands prices (0 to 65,535) can be
programmed globally (same price for all selections) or for
the single selections.
Should the majority of products be sold at the same price,
it will be convenient to set the price globally and then
change the figure of the selections with different prices.
Time bands
Four programmable time bands are provided for selling
products at different prices.
The time periods are programmable for beginning and end
time by hours (00 to 23) and minutes (00 to 59).
If the values for start and end of the time band are set to
00.00 the time period is disabled.
The reference time is kept by an internal clock, program-
mable as:
day/month/year weekday 1-7
and then
hour/minutes/seconds.
If the values for start and end of the time band are set to
00.00 the time period is disabled.
COIN MECHANISMS
It is possible to decide which of the payment system
protocols available are to be enabled for the functions.
The available payment systems are:
- Validators
- Executive
- BDV
- MDB