LAVAZZA BLUE LB 3300, Инструкция по использованию и установке

Страница: 34 / 64

© by N&W GLOBAL VENDING S.p.A.
30
1006 83288-00
EVADTS CODES
The EVADTS (European Vending Association Data Trans-
fer System) communication protocol has two codes for
identifying the machine and for recognising the data trans-
fer terminal:
PASS CODE
It is a four-digit alphanumeric code (0-9; A-F) that must be
the same as the one in the data transfer terminal to allow
its identification.
Press the confirm button “ ” and the code is displayed as
“0000” regardless of the actual value; then press the
correction button “ ” and the first digit will start blinking.
MISCELLANEOUS
This menu contains some sub-menus, used less fre-
quently, which permit control of the functions described
below.
MACHINE INFORMATION
INSTALLATION DATE
This function is used to store the current date of system as
installation date.
The date is printed when retrieving the statistics.
PROGRAMMING THE MACHINE CODE
When the “Machine code” function is displayed the eight-
digit numeric code identifying the machine can be changed
(from the default 0).
PROGRAMMING THE OPERATOR CODE
When the “Operator code” function is displayed the six-
digit numeric code identifying groups of machines can be
changed (from the default 0).
INITIALISING
When the “Initialise” function is displayed the vending
machine can be initialised restoring all default data.
This function should be used if there is a memory data error
or when the software is replaced.
All statistic information will be reset.
Press confirm button “ ” and the display will indicate the
message “Confirm?”. Press the confirm button “ ” again
and some parameters will be requested, which are:
“Model”
Defining whether the machine is Espresso or
Instant
“Country”
intended as type of base doses for the different selections
(e.g. IT coffee = 45 cc - FR coffee = 80 cc).
According to the models, the available “countries” are Italy,
France, Spain, Poland and Germany.
“Layout”
A number of Button/Selection combinations to choose
from is provided for each dose type model (the combina-
tions available for each layout are indicated in the dose
selection table supplied with the machine).
“Tank”
Defining whether the water supply is:
0 - from the mains
1 - from an internal tank
2 - from two internal tanks
When confirming the options the message “Working” is
displayed for a few seconds.
TECH>
MISCELLANEOUS
TECH>
"List of functions"
Using the scrolling buttons, its value can be changed
(during the change operation the value becomes visible).
Press the confirm button “ ” and the next digit starts
blinking.
Press the confirm button “ ” after changing the fourth digit;
the value is stored and the display indicates “0000” again.
SECURITY CODE
It is a further alphanumeric code for reciprocal recognition
between machine and EVADTS terminal.
Programming works as in the “Pass” code.
Connection
This function places the machine in wait mode for connec-
tion to retrieve data.
EVADTS CONNECTION
When activating this function, the machine awaits the
connection with a device to acquire the EVADTS statistics.