Lauda PROLINE P 5 C, Руководство по эксплуатации

Страница: 72 / 120

72 / 123 Proline heating thermostat 02/2022
7.12 Timer function
Using the timer function, the thermostat can carry out an action at a certain time or after a certain waiting period. The
actions are: Switching on the thermostat, entering the standby mode or one of the five programs in the programmer.
Command Timer 1 Timer 2

Open the device parameter menu via the soft
key Menu .

With the cursor keys continue to:

Clock

Timer 1 ,

or to Timer 2 ,

with the menu Status the selected timer is
switched off or on .
The standby key does not stop the timer!
Please exercise caution when thermostat is in standby mode! The thermostat is not switched off
safely.
A previously activated timer mode could unintentionally start the thermostat again from the
standby mode!
The menu Function is used to define when an ac-
tion is executed:

Similar to an electronic mains timer, Week
plan enables two switching events to be carried
out each day. The cycle is repeated after 7
days.

Time absolute defines a time and a date on
which a once-only action (switching event) oc-
curs. The time point is set with
Set time and
with Set date .
 Time relative defines a waiting period after
which a once-only action occurs. With Set
time up to 99h:59min can be entered. ( Set
date is masked out with this function selec-
tion).
 If the Week plan is activated, in this window
only Status , Function and Week plan are
displayed.
Pump Menu End T
set
T
fix
Set time
Set date
Timer 1
Timer 2
Format of date
Pump
Settings
Graph
Clock
Programmer
Interfaces
Control
Temp.Limits
Pump Menu End T
set
T
fix
Week plan
Time absolute
Time relative
Status
Function
Action
Set time
Set date