Lauda PROLINE P 5 C, Руководство по эксплуатации

Страница: 79 / 120

02/2022 Proline heating thermostat 79 / 123
7.13.3 Internal and external control parameter sets
If a thermostat is used for a number of applications, which always leads to a change of the control parameters, these
control parameters (up to 9 sets) can be saved in the thermostat and activated again as required.
Also saving is useful for finding the best control parameters; in this way external management of the control parame-
ters can be avoided.
There are 9 sets (each for internal and external sets of control parameters) saved at the factory.
In this menu the control parameters cannot be edited, they are only displayed.

With Activate the currently valid control parameters are used.
 With Upload actual the actual ones are read in and saved (for later reuse).

With Default the set of control parameters saved at the works is loaded again (in this case the control parameters
set by the customer are lost).
Command
Control parameter sets

Open the device parameter menu via the soft
key Menu .

With the cursor keys continue to:

Control

Control Parameters

Control para. sets .

The adjacent window appears.
Set 1 to Set 9.
 Select the desired set with and confirm
with .

In the setting window (see left) the selected
set is listed under
intern or
extern in the display.

Under Status the previously selected set:
is activated,
is read in and
the set, who was saved at the factory, is re-
stored.
Pump Menu End T
set
T
fix
Control Parameters
Control para. sets
Tv manual/auto
Correction limitation
Set 1
Set 2
Set 3
Set 4
Set 5
Set 6
Set 7
Set 8
Set 9
Pump Menu End T
set
T
fix
Status
intern
extern
Activate
Upload actual
Default