Lauda PROLINE P 5 C, Руководство по эксплуатации

Страница: 30 / 120

30 / 123 Proline heating thermostat 02/2022

The following always applies: After termination of the relevant settings, they
are accepted automatically after approx. 4 s or

the setting is accepted immediately with the Enter key.
and


Fault signal: Flashing red Alarm LED and acoustic signal.

An acoustic signal can only sound when it has not been intentionally deac-
tivated! (

7.8.6)
 The bath control occurs via the external temperature probe when the green
LED is lit.

Heating is active when the yellow LED is lit.

Cooling is active. When the setpoint temperature is lowered, it makes take up
to one minute before the blue LED is lit.
 The temperature of the external probe is displayed.
Command
 Enter key ("Confirm selection") and go back one
level.
End  Soft key function to confirm a selection or input
and to return to the main display window.
 Escape key to quit a window without changes
and to go back one level.
 Cursor keys for Up, Down, Left and Right.
+

Standby activation (pump and heater are deac-
tivated when the yellow LED is lit).
However, the Timer goes on! See safety infor-
mation on (

7.7.3).
Duo key:

Top: Decimal-point key.
 Bottom: Key for arithmetical sign.

Soft keys: 5 duo-keys which each have the
function shown in display above them. Soft-key
entries are shown framed in the operating in-
structions. Example: You would like to change
the setpoint temperature, then press the duo-
key under T
set
.